ice maker repair service oklahoma city oklahoma

Throughout the warm summertime days, the ice maker is our friend in the kitchen. What if your ice maker all of a sudden quits making any ice, what are you to do? Well, my friend, you are in luck, since this short article will help you recognize the reason why and also what are the needed actions to carry out in order to deal with the problem.
So, why is your ice maker not making any kind of ice?

1. Power link

Power up your ice maker to inspect if it is all right or not. If this is in a raised setting, your machine arm is in the off position it will not make any kind of ice.

2. Right freezer temperature level

If the ice maker arm is positioned appropriately and also is activated, continue to inspect the freezer temperature level. The temperature level must be within the series of 0 to 8 degrees Fahrenheit. Your equipment will not create ice if it’s over 10 to 12 degrees.

For a recently installed ice maker, you will certainly need approximately 24 hrs to allow the ice maker to cool down. A recently mounted ice maker may not function up until the ice mold temperature level has actually gone down to concerning 15F – 16F degrees. It may take up to about an hour and a half for the machine to begin working if you have simply connected a water line to the refrigerator. A freshly set up water line may have air in the line. It can occasionally take a couple of ice making cycles to get rid of the air in the line.

3. Check water source

Okay, in order to make ice, it requires water. Make certain that there is water moving to the ice maker. If there is water in the ice maker, yet it’s not freezing, use a refrigerator-freezer thermostat to verify that the temperature is cold enough for it to freeze.

4. Check copper supply

Make sure the copper supply line to the refrigerator valve is switched on under the sink, or originating from the basement.

After inspecting all the above stated factors as well as specifically that the freezer is cool enough however it is still not making any ice, check the base of the ice maker unit to see if it is cold, cool, warm or hot. If it is warm or hot in this case, you will certainly have to change this ice maker unit in order to get ice again out of the ice maker.

What if your ice maker all of a sudden stops making any kind of ice, what are you to do? Okay, in order to make ice, you need water. Make certain that there is water flowing to the ice maker. After checking all the above discussed factors and certain that the fridge freezer is cold sufficient but it is still not making any ice, check and feel the bottom of the ice manufacturer unit. In this case, you will have to change this component in order to make your ice maker job smoothly once more.

When all of these steps have been followed and no ice is being made it is time to call an ice maker repair company. Call Appliance Repair OKC Services at 405-378-4566 or you can visit our website at https://www.okcappliance.com.