freezer repair Oklahoma City
My Freezer Has Stopped Working And Won’t Turn On?
If your freezer stops working, or is not freezing, it could have an issue with your thermostat, which controls the temperature. If your freezer has stopped working and is not freezing, there may be an issue with the starter capacitor. If your freezer is not freezing your food, that may mean that you have an issue with the compressors startup relay. If you do not hear your compressor clicking, and the freezer is not cooling, there could be something wrong with your compressor or the compressor startup components.
The compressor produces, and then circulates, refrigerant through the freezer, so if it is bad, then the freezer is not freezing. What this means is that, if your starter relay is bad, the compressor at best may run intermittently — or, more likely, at all, meaning the freezer will not freeze.
The compressors start relay is also known as a controller, and it works by feeding electricity to the compressors starter circuitry so that your freezer starts up. The thermostat for the temperature control also has electrical contacts which feed electricity into the compressor circuitry when your freezer needs to begin cooling.
The temperature control thermostat sends power to different parts of the freezer, and if it is not working properly, the freezer is not cooling. A faulty thermostat will not send electricity to your refrigeration system, and if that is the case, the freezer will not cool. If broken, a thermostat will not be able to read temperatures accurately, telling your appliance exactly how cold the freezer is. The sealed system might leak, and not have enough freon to keep the appliance at its desired temperature.
If your freezer door is still not sealing properly after cleaning, you may need to replace your freezer seals or realign your freezer doors. In most cases, fixing the problem causing your frost accumulation, and letting your freezer run a couple defrost cycles, will remove excess ice, and your appliance will return to normal. Sometimes, manual defrost will return your freezer to normal.
This way, your fridge and freezer are reset completely, potentially solving several common problems. If you are seeing an error code, and are sure that your fridge and freezer are working correctly, you can probably get rid of the code by resetting the fridge or freezer. If your fridge and freezer are able to get the temperatures you want without issue, you are done with the reset and you fixed any issues there were to begin with. For instance, if you notice your fridge and freezer are not getting to the correct temperature, then you might have to reset them and reprogram the temperatures.
If you are looking for ways to reset your freezer and refrigerator, one of the first things you will want to do is disconnect your appliances. You might need access to the circuit breaker as well, depending on what happens once you unplug your freezer and fridge. Make sure to connect a number of power strips, all of them into the working socket, in order to power the fridge and freezer back up.
Pull your fridge out of the wall slowly, and then power it down. After you have disconnected your fridge, use the control panel located within your fridge to shut down both the fridge and the freezer.
Make sure that the appliances controls are set to 0degF (18degC) for the freezer and 37degF (3degC) for the fridge. Your fridge and freezer controls will differ depending on the brand and model of your fridge, but experts suggest keeping the temperature in the fridge at about 40degF.
The purpose of the temperature-controlled thermostat is to monitor your freezers temperature, then tell the control board how much electricity to send to the fan and the evaporator compressor to ensure that your fridge freezes. The evaporator fan motor pulls air across the vape coils and circulates it through your freezer, if it does not do its job, then your freezer is not cooling.
When your freezer fan is running, this means that your refrigerators defrost timer and cooling controls are both set to COLD. A cold control stuck in its Open setting, or the defrost timer stuck in Defrost, will also prevent freezer from running. The inside contacts on the defrost timer may be bad, which causes the defrost timer to stop when it is defrost, meaning that the compressor is not being signaled to defrost air inside the freezer. Most of the time, the compressor fan should be operating as well, while the freezer fan is operating.
The coil is the most difficult working part on a fridge, it is part of the process of taking hot gases and turning them into cool liquids, which makes a refrigerator cool. If your coils are clogged, disconnect your cooler (empty your cooler first) and then clean your coils. If you have cleaned, defrosted, and sealed-checked your refrigerator, and everything seems to be working, try pulling the appliance from the wall and vaccinating the coils using the crevice tool or brush attachment.
If you installed a new starter relay unit, power back the freezer and test to see if it is freezing now. Resetting it also can sometimes fix other problems internally, such as malfunctioning timer cycles, so this is one of the first things you should try if you think that something seems off about your fridge. Another reason why your Frigidaire fridge may not work as expected is if your thermostat for the temperature controls has stopped working.
To schedule refrigerator repairs in Oklahoma City contact Appliance Repair OKC Services by calling 405-378-4566 or visit our website at https://www.okcappliance.com to also our Google business page at https://cutt.ly/YEnc8qk. Call now!